| 539 | 8 | 2 |
| 下载次数 | 被引频次 | 阅读次数 |
以N-羟甲基丙烯酰胺(NMA)为交联单体,采用半连续种子乳液聚合法制备了NMA交联苯丙乳液,探讨了NMA用量、p H缓冲剂用量及引发剂对乳液性能的影响。研究结果表明:当NMA用量为2%,p H缓冲剂用量为0.3%,引发剂用量在0.5%～0.6%范围时,可获得综合性能优异的苯丙乳液。
Abstract：Using N-methylol acrylamide(NMA) as crosslinking monomer,NMA crosslinked styrene-acrylic emulsion was prepared by semi-continuous seed emulsion polymerization.The influence of NMA amount,pH buffer amount and initiator on the performance of emulsion was discussed.The research results showed that when the NMA amount was 2%,the pH buffer amount was 0.3%,and the initiator amount was in the range of 0.5%-0.6%,the styrene-acrylic emulsion with excellent comprehensive performance was obtained.
[1]张彩媚，张启航，张璐.一种利用乙酸乙烯酯改性苯丙乳液降低成本的方法[J].中国涂料，2019,34(3):50-54.
[2]谢德明，陈晨，杨珊珊.苯丙乳液的制备及其对自泳涂层的影响[J].浙江工业大学学报，2019,47(6):672-678.
[3]冯西平，黄康胜.PMMA/苯丙乳液的合成及粒径可控研究[J].中国胶粘剂，2019,28(8):20-23.
[4]成航航，沈一丁，马国艳，等.磷酸酯化苯丙共聚物乳液的合成及防锈性能[J].精细化工，2020,37(1):180-188.
[5]DUAN Y,HUO Y,DUAN L.Preparation of acrylic resins modified with epoxy resins and their behaviors as binders of waterborne printing ink on plastic film[J].Colloids and Surfaces A:Physicochemical and Engineering Aspects,2017,535(9):225-231.
[6]WEI S Q,BAI Y P,SHAO L.A novel approach to graft acrylates onto commercial silicones for release film fabrications by two-step emulsion synthesis[J].European Polymer Journal,2008,44(8):2728-2736.
[7]左艳梅.半连续种子乳液预聚法合成核-壳型苯丙乳液的研究进展[J].中国胶粘剂，2017,26(11):39-44.
[8]江德锦，范理，李同军.核壳型苯丙乳液的冻融稳定性[J].涂料工业，2019,49(6):19-23.
[9]张禹，朱超，冯波.苯丙乳液游离单体含量影响因素的研究[J].胶体与聚合物，2016,34(4):161-163;181.
[10]肖龙，鄢冬茂，胥维昌.丙烯酸酯乳液聚合稳定性的研究[J].中国涂料，2017,32(7):19-23.
[11]沈大谱.抗冻融苯丙乳液的制备及其应用研究[D].广州：华南理工大学，2014.
[12]王海侨，廉芒芬，李效玉.N-羟甲基丙烯酰胺自交联乳液的合成及其交联反应的研究[J].化工新型材料，2019,47(12):187-190.rosslinked styrene-acrylic emulsion
基本信息:
DOI：10.13416/j.ca.2020.09.005
中图分类号:TQ316.334
引用信息:
[1]温丽瑗,黄睿,陈东庆等.NMA交联苯丙乳液的制备及性能研究[J].中国胶粘剂,2020,29(09):16-19+34.DOI:10.13416/j.ca.2020.09.005.
基金信息:
茂名市科技计划项目（2019018013）